The packaging supply in Central Virginia was built for a different kind of manufacturing than the kind arriving now.

For most of the last century, the region’s anchor plants were chemical, fiber, and tobacco operations along the James, running long programs that buy pallets and wood by the truckload to standard specs. The plants arriving now build switchgear, cooling equipment, precision metal, and glass, in many configurations, against long backlogs, with crews that are hard to hire. Across industrial packaging programs along this stretch of I-95, that gap shows up as wood that’s the wrong material, sizes that don’t fit, and operators fixing both by hand.

Chester sits right where the region’s old industrial economy meets its new one, and packaging programs are breaking along that line.

Key Takeaways

  • Central Virginia has an established supply base for high-volume, standard-spec pallet programs, but manufacturers with specialized packaging requirements may need more consistent materials, tighter tolerances, and greater configuration flexibility.
  • The plants arriving now need dry, dimensionally consistent components in many sizes, on configurations that change with every order.
  • Humidity, a tight labor market, and job-site staging at new data center campuses make that mismatch more expensive here than in steadier markets.
  • Specs written around what’s easiest to buy locally will keep failing until they name the material, tolerance, and handling the product needs.

Why the Corridor Around Chester Is Harder on Packaging Programs Than It Was a Few Years Ago

New manufacturing is arriving faster than the local packaging supply is changing to meet it. To see why that matters, it helps to look at what the supply base was built for, what’s arriving, and the conditions that sit on top of both.

A Supply Base Built for the Old Richmond Economy

The industrial plants that defined this region ran long, steady programs. Hopewell has been a chemical town since DuPont built there in 1914, Greater Richmond is home to DuPont’s largest manufacturing facility in the world, and Richmond’s history was built on tobacco.

Programs like those tend to buy pallets and wood at volume, in standard sizes, at the lowest acceptable cost. The regional supply base grew up serving them, and it still reflects that.

You can see it in the wood. Virginia has an established wood-products industry, pallet makers outside the West have long relied heavily on mixed hardwood, and much of that hardwood is sold green. Pine lumber comes from a narrower set of mills, like the pine sawmill in Isle of Wight County.

The supplier field reflects it too. Central Virginia is ringed with pallet and crate shops, and national pallet networks run plants within a few hours’ drive.

A smaller part of the regional supply runs the other way: kiln-dried pine, remanufactured into cut stock and panels sized to each part number. That’s the supply a technical program needs, and it’s the work Conner Industries’ Chester plant was built around.

New Plants That Need Something Different

The newest manufacturing around Chester is a different kind of customer. In the first half of 2025, the Richmond market added more data center capacity than any other U.S. market, and the plants that supply those campuses are setting up nearby.

Since 2024, makers of evaporative cooling equipment, heat exchanger coils, power management products, and medium-voltage switchgear have opened, expanded, or announced plants in Chesterfield, Henrico, and Prince George counties. Steel fabricators, aluminum extruders, and glass producers across the region have added capacity alongside them, and roughly 12.6 million square feet of industrial space was under construction in the Richmond market as of mid-2026.

These plants ship tall, configured, high-value products in many sizes. Their packaging needs dry wood, tight tolerances, and drawings that change with the order, which is close to the opposite of what a volume-built supply base is set up to deliver.

Conditions That Raise the Cost of Getting It Wrong

Three local conditions make that mismatch more expensive here than it would be in a steadier market:

Put together, the corridor around Chester is asking a volume-built supply base to run technical programs under some of the tightest conditions in the country.

Where Packaging Programs Break When Technical Plants Buy From a Volume Market

The mismatch shows up on the floor long before it shows up on a damage report.

On a new or growing program around Chester, the workarounds tend to look like this:

  • A skid for a switchgear section gets built from green hardwood because that’s what the nearest shop had in stock.
  • Banding groove that measured true in spring fits differently after a humid summer in an unconditioned warehouse.
  • A configured unit gets forced onto a standard pallet size, then blocked and shimmed by hand.
  • A pallet program stocks the five highest-volume sizes and leaves the rest on permanent rush.
  • A unit staged for weeks at a campus under construction reaches its pad racked.

Each one gets logged as a one-off. Each one traces back to buying technical packaging out of a market built for something else.

When the Local Stock Is the Wrong Material

Green hardwood and kiln-dried pine behave differently, and a spec that doesn’t name the difference will get whichever one is easiest to buy. Green hardwood often arrives at or above fiber saturation, and in a closed trailer it releases that moisture into the air around the load.

Kiln-dried stock has its own local problem. At 70°F, air in the mid-80s for relative humidity brings wood to roughly 17% to 19% moisture content, so dry pine stored through a Central Virginia summer can climb back toward the 19% line it was graded to, and past the roughly 20% level where mold begins to grow.

For the products arriving in this corridor, that moisture lands on finished aluminum, glass, and electrical equipment. The material under the product has to be specified as carefully as the product itself.

The fix starts at the source. At Conner’s Chester plant, cut stock is remanufactured from kiln-dried pine, so it starts dry, and because it ships in mixed loads on the plant’s own trucks, it can arrive closer to when it’s needed and spend less time soaking up humid air in a warehouse.

When Standard Sizes Meet Configured Equipment

A supply base built for volume runs on a handful of sizes. Configured equipment needs dozens, and the odd ones become exceptions that live on rush.

New plants add a second problem. A cooling equipment maker moving its production from Texas to Chesterfield, or any line launching on a parent plant’s spec, can bring packaging drawings written for another region’s handling and lumber. The mismatches are usually small and physical:

  • Runners spaced for one plant’s forklifts may not suit another’s.
  • Blocking sized to one supplier’s stock may not match a local supplier’s.
  • A skid designed for a short dock-to-dock run may now spend weeks staged at a job site.

Every one of those gaps gets closed by hand, by an operator trimming blocking or re-shimming a unit. In an already challenging manufacturing labor market, that time comes straight out of production.

For manufacturers running multiple packaging configurations at consistent volumes, Chester can support cut-to-spec components and repeatable production programs without forcing every product onto a standard pallet design. Blocking and panels are cut to the drawing and ship on the same truck as the rest of the order, so the odd part number stops living on rush and nobody trims at the pack station.

When the Job Site Becomes the Warehouse

A lot of what leaves plants around Chester never goes to a loading dock. Data center developers are building campuses on large rural tracts in counties like Hanover, Louisa, Caroline, and Henrico, and equipment for those projects arrives at sites that are still being built.

There, the packaging becomes the storage. Installation manuals note that shipping packaging isn’t meant for storage, yet a unit waiting on a construction schedule stays on its skid, in the same humid air, through every forklift move until it’s set.

A base built from whatever a volume supplier stocks, sized for dock-to-dock freight, has to survive weeks of job-site life it was never designed for. A skid built from kiln-dried pine to a drawing that accounts for staging, rigging, and repeated moves starts that life with far more margin.

Why the Same Mismatch Hits Different Shippers in Different Ways

The gap between the supply base and the new plants is shared across the region. Where it causes failure depends on what’s being shipped and how it’s handled.

New Plants Building Equipment for the Data Center Supply Chain

The newest plants around Chester build switchgear, power distribution equipment, and cooling units for the data center supply chain. That equipment is behind schedule before it ships: lead times for medium-voltage switchgear and high-voltage transformers routinely stretch from many months to years.

The skid under that equipment does its hardest work after the truck leaves. Switchgear handling instructions commonly tell installers to keep the skids under the equipment through every move until each section reaches its final position, and warn that the units are top heavy and should be strapped to the forklift. Tall cabinets on a small footprint carry a high center of gravity, so a wider standing area helps counter tipping.

That’s a different base than a standard pallet program is set up to build, and closer to the specialty skids the Chester plant builds to drawing and can repeat order after order from its drawing history. In data center equipment shipping, it needs to be sized to the unit’s center of gravity and to the equipment that will lift and roll it, built from dry stock, with fasteners that still hold after the third move.

Cooling equipment adds contact-point risks at fins and hydraulic connections, covered in more depth in why precision cooling units pass factory QC and fail commissioning and how CDU packaging protects the components that fail inspection. Power equipment upstream faces the same pattern, as large power transformer packaging shows.

Metal Fabricators and Aluminum Shops Adding Data Center Volume

The region’s metals base is growing with the same demand. A structural steel fabricator in Southside Virginia added workers to keep up with data center work, and aluminum extrusion in Prince George County ships rod, bar, and shapes to service centers nationwide.

Much of that metal ships in banded bundles separated by wood dunnage, so board consistency becomes a production issue. Automated strapping lines depend on consistent boards, which is why auto-strapper grade banding groove is machined to exact size and length with limited bow and twist. Green stock that keeps drying after it’s cut has a harder time holding that tolerance, while banding groove machined from kiln-dried pine has much less shrinkage left to change its dimensions.

For aluminum, wet wood is also a surface problem. Aluminum stains when water gets trapped between mating surfaces with no airflow to clear it, and nearly all staining happens during shipping, handling, or storage. Dry dunnage removes one moisture source from the bundle, and a bundle secured firmly to its skid avoids the movement that tears protective wrap.

Glass Plants Joining the Corridor

Glass is part of the same industrial growth. A window and door manufacturer committed $54.3 million to a glass manufacturing operation in Prince George County, set up to make thin triple-pane insulated and laminated glass units.

Those units travel in racks and cases, packed close. Glass makers warn that glass shouldn’t be stored where relative humidity exceeds 80%, and that condensation staining is worse in racks or crates with little space between panes, which puts Central Virginia’s humid mornings squarely in the packaging conversation.

Rack spacing, ventilation, and staging time all become packaging decisions. Racks that hold each unit’s orientation and spacing, built from wood that won’t add moisture of its own, keep a humid week in staging from turning into a glass claim.

Three different products, one shared cause: technical packaging bought out of a supply base built for volume.

Why Industrial Packaging Specs Default to What’s Easiest to Buy Around Chester

In a market tuned for volume, a vague spec gets filled with whatever the market stocks. Around Chester, that usually means the wrong material, the wrong size, or both.

Four local pressures keep it from getting caught:

  • Specs written against local availability: When the purchase order lists only size and quantity, a supplier can meet it with green hardwood or a standard size and be within spec. The spec has to name moisture, species, and tolerance to stop that.
  • Engineers who’d own the spec are the hardest hires: Manufacturing and process engineers are among the skills most at risk in a state already posting manufacturing jobs faster than any other. When those seats sit open, nobody revisits the packaging spec until the floor forces it.
  • Suppliers chosen for availability: When volume jumps and crews are short, purchasing buys whatever wood can arrive this week, and in this region that’s often green hardwood in a standard size. A supplier that keeps dry stock cut to your drawings and can turn several orders quickly takes away the reason to settle.
  • Backlogs that reward shipping over fixing: With switchgear and transformer lead times already stretching into years, a plant under schedule pressure ships on the packaging it has. The gap gets patched by hand, one trimmed board at a time.

For industrial packaging in Virginia right now, the spec has to do the work the local market won’t do by default.

What Keeps a Technical Packaging Program Stable in a Market Built for Volume

A stable program writes down what the product needs, so the supply base can’t quietly substitute what it happens to stock.

That usually comes down to six decisions:

  • Materials by spec: Put moisture content, species, and dimensional tolerance on the purchase order, so green hardwood can’t replace kiln-dried pine. Check moisture at receipt, especially through Central Virginia summers.
  • Drawings that travel: Keep a drawing for every configuration, with a named owner. When a line arrives from another state’s plant, check the drawing against local handling and lumber before the first build.
  • Bases built for real handling: Size skids and runners to the unit’s center of gravity and to the equipment that will lift, roll, and stage it on a job site. Choose fasteners that hold through repeated moves.
  • Consolidated supply: Bring cut stock and assembled components on the same truck. Fewer deliveries mean fewer chances for one missing part to stop a finished unit.
  • Delivery tied to the build plan: Schedule packaging against production. On backlogged equipment, a skid shortage has to surface before the unit is finished.
  • A review trigger: Revisit the spec whenever a program moves, adds a line or lane, or steps up in volume. In a corridor changing this fast, those triggers come often.

None of these is exotic. Each one needs an owner, and a supplier relationship that holds up when the answer changes.

Why a Dry-Pine Plant Inside the Corridor Changes the Math

In a region where much of the supply runs green and high-volume, a plant built around dry, cut-to-spec wood gives technical programs a different option.

The corridor has no shortage of pallet and lumber suppliers. What separates them for this kind of work is whether one plant can deliver dry, consistent components in many sizes, mix them on one truck, and rebuild last quarter’s configuration without starting over.

For manufacturers consuming cut lumber at consistent volumes, the advantage extends beyond individual packaging configurations. Repeatable supply of kiln-dried southern yellow pine, banding groove, blocking, and dunnage allows purchasing and production teams to standardize material specifications, consolidate orders, and align deliveries with manufacturing schedules. That consistency is especially valuable for metal fabricators, equipment manufacturers, and other operations where packaging materials are consumed as part of daily production.

Conner’s Chester plant, less than a mile from I-95 between Richmond and the Tri-Cities, sits in the middle of the region’s shift from old programs to new ones. That position pays off because the plant can also:

  • Supply kiln-dried southern yellow pine cut to specification, including banding groove, blocking, dunnage, and cut-to-size panels for repeat manufacturing programs.
  • Run its own trucks with mixed loads of cut, assembled, and dimensional lumber.
  • Keep drawing history on past work, so a configuration rebuilds the same way every time.

With all three in place, a technical program stops depending on whatever the local market happens to stock.

Where to Start: The Program That Outgrew Its Packaging Supply

Start with the program everyone already knows is running on the wrong packaging.

For many growing manufacturers around Chester, that might be the line that launched on another plant’s spec, the configured unit that always gets shimmed by hand, or the skid size that’s permanently on rush.

A focused review of that one program is enough to show whether packaging is the cause. It usually covers three things:

  • Current performance and pain: Shortages, rush orders, rework at the pack station, and damage reports tied to the base, blocking, or moisture. This is where normalized workarounds surface.
  • Real material and handling flow: What wood arrives, where it gets cut or modified, how long units are staged, and how they’re lifted and moved. Most gaps show up between the spec and the floor.
  • Design opportunities: Where material, base geometry, consolidation, or delivery cadence can change for that program. The goal is a specific change you can test.

From there, a pilot on one SKU and one lane produces a real before-and-after. If shortages and rework drop, extending the spec is straightforward, and if they don’t, you’ve learned that cheaply.

Put Conner’s Chester Plant to Work on the Program That’s Outgrowing Its Supply

Conner’s Chester plant is built for programs like this. It specializes in industrial lumber, banding groove, and pallet lumber, along with custom pallets and crates for manufacturers across Virginia, the Washington metro area, and Norfolk.

Its kiln-dried southern yellow pine, its own delivery trucks, and its drawing history on past programs mean a configuration built once can ship the same way again as the program grows.

That matters most during a pilot, when the spec is still being proven on one line. To start with a review of one program, contact the Chester team or call 804-706-4229.